Update AT&T GS4 I337 on 4.2.2 MF3 to Kit Kat 4.4.2 Compatible Devices. Galaxy S4 I337 (ROOTED) Required Downloads. Odin 3.07 - copy.com/s/zowadQ32bn9T/NasirTechOdin307.zip (copy and paste into browser).
Kit Kat 4.4.2 UCUFNB1 - mega.co.nz/#!88MSyQoJ!8zxUFpiXhteaLDNemgqRbBSzy6gZJHRCPRW2Ynd IO4g (copy and paste into browser) Instructions WARNING I'm not responsible for bricks or damages to your device. You did it yourself. The update to Kit Kat 4.4.2 WILL REMOVE ROOT access. The ROM is stock AT&T Kit Kat 4.4.2 1.
Download Kit kat 4.4.2 UCUFNB1 ROM. Download Odin 3.07. Unplug phone from PC, and switch OFF. Wait about 5 seconds for phone off vibration confirmation. Go into dowload mode by pressing VOLUME DOWN, POWER and HOME buttons at the same time until phone vibrates and the Dowload Mode prompt appears (see download-mode.jpeg). Press Volume UP to CONTINUE to Download Mode screen (see download.jpeg). Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe file as an administrator (Right click on the.exe file and click on Run as administrator) 7.
Now connect your Galaxy S4 I337 to your computer via USB cable 8. In Odin3 screen, you should see a COM Port number like “0:COM7” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3. Make sure that, only the “Auto Reboot” and “F.
Reset Time” options are checked. In Odin screen, click on PDA button (check-box should automatically check, if not manually check) and select the downloaded firmware file with.tar.md5 extension (The firmware file look something like: 'ALLATTI337UCUFNB1I337ATTFNB1505595REV06user lowshipMULTICERT.tar.md5' 11. Gluck orfeo ed euridice.
Now, click on the Start button to begin the installation process. It takes around 10 minutes to complete. Depends on how long the Factory Reset and Wipe takes. Once completed, you would see “PASS!” message in ID:COM port having green background.
Your phone should automatically reboot after completion. The phone will reboot at least 3 times loading the new ROM. Device can be disconnected from PC.
For any questions PM me. Quote: Originally Posted by fernan24 Update AT&T GS4 I337 on 4.2.2 MF3 to Kit Kat 4.4.2 Compatible Devices. Galaxy S4 I337 (ROOTED) Required Downloads.
Odin 3.07 - copy.com/s/zowadQ32bn9T/NasirTechOdin307.zip (copy and paste into browser). Kit Kat 4.4.2 UCUFNB1 - mega.co.nz/#!88MSyQoJ!8zxUFpiXhteaLDNemgqRbBSzy6gZJHRCPRW2Ynd IO4g (copy and paste into browser) Instructions WARNING I'm not responsible for bricks or damages to your device.
You did it yourself. The update to Kit Kat 4.4.2 WILL REMOVE ROOT access. The ROM is stock AT&T Kit Kat 4.4.2 1. Download Kit kat 4.4.2 UCUFNB1 ROM. Download Odin 3.07.
Unplug phone from PC, and switch OFF. Wait about 5 seconds for phone off vibration confirmation.
Go into dowload mode by pressing VOLUME DOWN, POWER and HOME buttons at the same time until phone vibrates and the Dowload Mode prompt appears (see download-mode.jpeg). Press Volume UP to CONTINUE to Download Mode screen (see download.jpeg). Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe file as an administrator (Right click on the.exe file and click on Run as administrator) 7. Now connect your Galaxy S4 I337 to your computer via USB cable 8. In Odin3 screen, you should see a COM Port number like “0:COM7” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked. In Odin screen, click on PDA button (check-box should automatically check, if not manually check) and select the downloaded firmware file with.tar.md5 extension (The firmware file look something like: 'ALLATTI337UCUFNB1I337ATTFNB1505595REV06user lowshipMULTICERT.tar.md5' 11.
Now, click on the Start button to begin the installation process. It takes around 10 minutes to complete. Depends on how long the Factory Reset and Wipe takes. Once completed, you would see “PASS!” message in ID:COM port having green background. Your phone should automatically reboot after completion.
The phone will reboot at least 3 times loading the new ROM. Device can be disconnected from PC. For any questions PM me. Quote: Originally Posted by fernan24 Update AT&T GS4 I337 on 4.2.2 MF3 to Kit Kat 4.4.2 Compatible Devices. Galaxy S4 I337 (ROOTED) Required Downloads. Odin 3.07 - copy.com/s/zowadQ32bn9T/NasirTechOdin307.zip (copy and paste into browser). Kit Kat 4.4.2 UCUFNB1 - mega.co.nz/#!88MSyQoJ!8zxUFpiXhteaLDNemgqRbBSzy6gZJHRCPRW2Ynd IO4g (copy and paste into browser) Instructions WARNING I'm not responsible for bricks or damages to your device.
You did it yourself. The update to Kit Kat 4.4.2 WILL REMOVE ROOT access. The ROM is stock AT&T Kit Kat 4.4.2 1. Download Kit kat 4.4.2 UCUFNB1 ROM. Download Odin 3.07.
Unplug phone from PC, and switch OFF. Wait about 5 seconds for phone off vibration confirmation. Go into dowload mode by pressing VOLUME DOWN, POWER and HOME buttons at the same time until phone vibrates and the Dowload Mode prompt appears (see download-mode.jpeg).
Press Volume UP to CONTINUE to Download Mode screen (see download.jpeg). Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe file as an administrator (Right click on the.exe file and click on Run as administrator) 7. Now connect your Galaxy S4 I337 to your computer via USB cable 8. In Odin3 screen, you should see a COM Port number like “0:COM7” at ID:COM section and “Added!” text at the message box.
This means your device has been detected by Odin3. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked. In Odin screen, click on PDA button (check-box should automatically check, if not manually check) and select the downloaded firmware file with.tar.md5 extension (The firmware file look something like: 'ALLATTI337UCUFNB1I337ATTFNB1505595REV06user lowshipMULTICERT.tar.md5' 11.
Now, click on the Start button to begin the installation process. It takes around 10 minutes to complete. Depends on how long the Factory Reset and Wipe takes.
Once completed, you would see “PASS!” message in ID:COM port having green background. Your phone should automatically reboot after completion. The phone will reboot at least 3 times loading the new ROM.
Device can be disconnected from PC. For any questions PM me. Quote: Originally Posted by fernan24 Update AT&T GS4 I337 on 4.2.2 MF3 to Kit Kat 4.4.2 Compatible Devices.
Galaxy S4 I337 (ROOTED) Required Downloads. Odin 3.07 - copy.com/s/zowadQ32bn9T/NasirTechOdin307.zip (copy and paste into browser). Kit Kat 4.4.2 UCUFNB1 - mega.co.nz/#!88MSyQoJ!8zxUFpiXhteaLDNemgqRbBSzy6gZJHRCPRW2Ynd IO4g (copy and paste into browser) Instructions WARNING I'm not responsible for bricks or damages to your device. You did it yourself. The update to Kit Kat 4.4.2 WILL REMOVE ROOT access.
The ROM is stock AT&T Kit Kat 4.4.2 1. Download Kit kat 4.4.2 UCUFNB1 ROM. Download Odin 3.07. Unplug phone from PC, and switch OFF. Wait about 5 seconds for phone off vibration confirmation. Go into dowload mode by pressing VOLUME DOWN, POWER and HOME buttons at the same time until phone vibrates and the Dowload Mode prompt appears (see download-mode.jpeg). Press Volume UP to CONTINUE to Download Mode screen (see download.jpeg).
Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe file as an administrator (Right click on the.exe file and click on Run as administrator) 7. Now connect your Galaxy S4 I337 to your computer via USB cable 8. In Odin3 screen, you should see a COM Port number like “0:COM7” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked. In Odin screen, click on PDA button (check-box should automatically check, if not manually check) and select the downloaded firmware file with.tar.md5 extension (The firmware file look something like: 'ALLATTI337UCUFNB1I337ATTFNB1505595REV06user lowshipMULTICERT.tar.md5' 11.
Now, click on the Start button to begin the installation process. It takes around 10 minutes to complete. Depends on how long the Factory Reset and Wipe takes. Once completed, you would see “PASS!” message in ID:COM port having green background. Your phone should automatically reboot after completion.
The phone will reboot at least 3 times loading the new ROM. Device can be disconnected from PC. For any questions PM me.
Our today’s article is about installing Android 4.4.2 KitKat on AT&T Galaxy S4 SGH-I337. The AT&T variant of the Samsung (KRX:005935) Galaxy S4 is model SGH-I337, having the same hardware configuration of the Samsung Galaxy S4. Now you can push the Android 4.4.2 KitKat update to the Galaxy S4 SHG-I337 as AT&T didn’t bring this update for S4 devices.
The latest build, i.e., labelled I337UCUFNB1 comes with some new features, such as Galaxy Gear compatibility, Dialler app, Gallery app update, drag-and-drop feature and uninstall or disable apps, etc. According to. We’ve a quick guide that can be easily understood by a Samsung user via Odin flashing tool. So now go ahead and follow this step by step guide to install Android 4.4.2 KitKat on AT&T Galaxy S4 SGH-I337. Make a proper backup of all your valuable data, such as SMS, MMS, internal storage, contacts, call logs, etc. Enable USB Debugging Option on your Galaxy S4.
Download and install. Download. Download the. Your Galaxy S4’s battery must be at least charged about 70 to 80% to avoid any mishaps during the installation process. Installing Android 4.4.2 KitKat I337UCUFNB1 on AT&T Galaxy S4 SGH-I337 Step No 1: First of all extract the Odin Flashing Tool that you’ve downloaded from the above link. Now launch Odin flashing tool (Odin3 v3.09.exe) as an Administrator on your PC. Step No 2: After launching Odin Flashing Tool, ensure that only two options 1.
F.Reset Time and 2. Auto Reboot are checked. Step No 3: Boot your Galaxy S4 into Download Mode. To put your device into Download Mode, first turn it off and then press and hold the Volume Down + Home + Power buttons at the same time, until a warning screen appears.
Then press the Volume up button to boot your device into Download Mode. Step No 4: While your device is in Download Mode, connect it to your PC via its USB data cable. Step No 5: If your device is has been successfully connected to your PC, you’ll see the ID: COM port on the top left of the Odin window, otherwise your device’s drivers are not properly installed. Step No 6: Extract the firmware package that you’ve already downloaded from the above-given link. It will look like ALLATTI337UCUFNB1I337ATTFNB1505595REV06userlowshipMULTICERT.tar.md5 Step No 7: Now click on the PDA button and select the extracted firmware package file.
Step No 8: Start the flashing process by clicking on the Start button. Step No 9: A PASS!
The message will be appeared after the flashing process completed, your device will be automatically rebooted, and you’ll get the new and updated firmware on your AT&T Galaxy S4 SGH-I337. You’ve successfully installed the Android 4.4.2 KitKat on your AT&T Galaxy S4 SGH-I337.
Do let us know if you have any query or question about this update in the comments area below.
Google burst out an unpredictable treat zooming out of its headquarter recently with the release of Android 4.4.4 update by sharing factory images and Over The Air (OTA) update for Nexus devices. While Google has come up with factory images for Android 4.4.4 of several Nexus devices, OTA updates are not yet available to all nexus devices. Factory images for Nexus 4, 5, 7 and 10 is available of developers’ site. However, the developer’s listing present with Google reveals that listing is not available for some Nexus devices as an OTA update.
This entry was posted in and tagged, on. Google has released update for all the AOSP supported devices that include Nexus 4, Nexus 5, 7 and Nexus 10. The update is nothing more than bug fixes and minor improvements, unlike the Android 4.4.1 that brought huge camera update for Nexus 5. Android 4.4.2 OTA update packages are now available for download and you can install them manually.
In this guide we’ll guide you through the steps to install Android 4.4.2 OTA update on Nexus 4, 5, Nexus 7, 10. This entry was posted in and tagged, on.
Kitkat 4.4.2 Firmware Download
Android 4.4 KitKat is finally available for download and as expected, Nexus devices are the first among all android devices to receive the update. Android 4.4 KitKat factory images are available for the Nexus 5, Nexus 4, Nexus 7 2013 (both WiFi and LTE), Nexus 7 2012 (both WiFi and data), Nexus 10 and OTA (over-the-air) updates are available for Nexus 7, Nexus 7 2013 and Nexus 10. Hit the jump to download Android 4.4 KitKat for Nexus 4, 5, 7, 10 (factory images and OTA updates) from the direct download links. This entry was posted in and tagged, on.
Today, Samsung started a wave of updates for its flagship devices to latest version of Android – KitKat 4.4.2. First region that get the official firmware is XEO (Poland), others to follow in the upcoming hours/days/weeks, but if you don’t want to wait longer, grab it from links below and flash using Odin! Here’s a little update info: Device: Galaxy Note 3 (Snapdragon 800) Model: OS: Android KitKat 4.4.2 Build Date: PDA: N9005XXUENA6 CSC: N9005OXXENA5 Modem: N9005XXUENA2 Changelist: 340325 Region: (Poland) And as always you can download stock firmware for Galaxy Note 3 on its, or using KIES if you already own the device.